Disc Mower Conditioners

DMC8500 Series

Modèles

* Le modèle affiché peut inclure des outils ou des accessoires optionels, vendus séparément.
  • DMC8532T

    • Type: Center Pivot Trailed
    • Cutting Width: 10'6" (3.2m)
    • Conditioner: SemiSwing Tine
    • Horsepower (min): 80.0 HP
    • PTO: 540/1000RPM
    Demandez un prix
  • DMC8532R

    • Type: Center Pivot Trailed
    • Cutting Width: 10'6" (3.2m)
    • Conditioner: Rubber Roller
    • Horsepower (min): 80.0 HP
    • PTO: 540/1000RPM
    Demandez un prix
  • DMC8536T

    • Type: Center Pivot Trailed
    • Cutting Width: 11'6" (3.5m)
    • Conditioner: SemiSwing Tine
    • Horsepower (min): 90.0 HP
    • PTO: 540/1000RPM
    Demandez un prix
  • DMC8536R

    • Type: Center Pivot Trailed
    • Cutting Width: 11'6" (3.5m)
    • Conditioner: Rubber Roller
    • Horsepower (min): 90.0 HP
    • PTO: 540/1000RPM
    Demandez un prix
  • DMC8540T

    • Type: Center Pivot Trailed
    • Cutting Width: 13'1" (4m)
    • Conditioner: SemiSwing Tine
    • Horsepower (min): 100.0 HP
    • PTO: 540/1000RPM
    Demandez un prix
  • DMC8540R

    • Type: Center Pivot Trailed
    • Cutting Width: 13'1" (4m)
    • Conditioner: Rubber Roller
    • Horsepower (min): 100.0 HP
    • PTO: 540/1000RPM
    Demandez un prix
  • DMC8547T

    • Type: Center Pivot Trailed
    • Cutting Width: 15'5" (4.7m)
    • Conditioner: SemiSwing Tine
    • Horsepower (min): 120.0 HP
    • PTO: 540/1000RPM
    Demandez un prix
  • DMC8547R

    • Type: Center Pivot Trailed
    • Cutting Width: 15'5" (4.7m)
    • Conditioner: Rubber Roller
    • Horsepower (min): 120.0 HP
    • PTO: 540/1000RPM
    Demandez un prix

Aperçu de la série

Experience excellent maneuverability. The Kubota DMC8500 Series come equipped with a center pivot and swivel hitch headstock. This important advantage in mower design allows operators to mow in one continuous pattern, without the need for constantly opening up new headlands. This trailed mower conditioner covers more ground with an 10'6" (3.2m) - 15'5" (4.7m) working width and heavy-duty suspension system built for maximum flotation. Available in roller and tine conditioning configurations

Caractéristiques

Three-bladed discs With three blades per disc, Kubota mowers provide a 50% higher cutting frequency compared to conventional solutions. This means a third less load per blade, an even load on the drive, smoother power usage, and produces a neat, cleanly cut stubble.
Three-bladed discs

Caractéristiques

Fully welded cutterbar The Kubota cutterbar’s high cooling and lubrication efficiency oil pump system reduces wear and tear. The fully welded cutterbar with overlapping C-channels makes for a very strong design requiring low maintenance with no risk of loose bolts.
Fully welded cutterbar

Caractéristiques

Shear Protection Shear protection of gear wheels and the drive system designed to break in case or overload or major contact. Once sheared, the hub is easily replaceable for minimum downtime.
Shear Protection

Caractéristiques

Counter-rotating discs An even number of counter-rotating discs provides generous overlap between all discs and a better crop throughput.
Counter-rotating discs

Caractéristiques

Independent Active Suspension The complete mowing section, is suspended independently from the main chassis by either two or four long adjustable suspension springs, allowing field tracks and contours to be closely followed. If an obstacle is encountered in the field, the mowing section will lift up and backwards, protecting the cutterbar from damage.
Independent Active Suspension

Caractéristiques

Easy adjustment of stubble height A simple crank adjusts the whole cutterbar assembly angle up or down to a desired stubble height. While standard with 40 mm skid shoes, additional 20 mm, 60 mm or 80 mm are available to further adjust cutting height.
Easy adjustment of stubble height

Caractéristiques

Full-width Semi Swing Tine Conditioning The Kubota SemiSwing tine conditioner with adjustable conditioning hood is highly adaptable to varying crop types. During operation tines will stay in a fixed position, providing full cutterbar width conditioning with minimum wear.
Full-width Semi Swing Tine Conditioning

Caractéristiques

Full-width Rubber Roller Conditioning Roller conditioning provides gentle, yet effective handling of fragile crop such as alfalfa or clover. The adjustable spring-controlled pressure exerted between the two rollers guarantees uniform conditioning and low risk of plugging.
Full-width Rubber Roller Conditioning

Caractéristiques

Adjustable Swath Formation Easy adjustable windrow width ranging from narrow to widespread. Rear deflector is fully adjustable to help stand the crop up or lay it down allowing for different windrow textures.
Adjustable Swath Formation

Caractéristiques

Ease of Adjustments and Maintenance Single-bolt or optional hydraulic stubble height adjustment, swing-away front curtain and hood, optional hydraulic roller separation kit and, accessible cable and hose routing.
Ease of Adjustments and Maintenance

Caractéristiques

BX Belt Merger Kit The optional BX belt merger kit can be fitted on trailed DMC's to deposit one swath onto another creating fuller windrows. When not needed, it can be lifted up and out of the way for typical single swath formation.
BX Belt Merger Kit

Caractéristiques

Exceptional Maneuverability The Kubota DMC8500 Series come equipped with a center pivot and swivel hitch headstock and gear box. This important advantage in mower design allows operators to mow in one continuous pattern, without the need for constantly opening up new headlands.
Exceptional Maneuverability

Offres actuelles

Voir Tout

Téléchargements

Brochures

Manuals